level Guru Multi Level Indicator

At Avntek we always strive to present most innovative products and to make life resources more competent and to its optimized used. In the same line Level Guru a smarter product to monitor multi level tank indicator to makea complex task most easy with most economical solution

Produt Featues

• Water level indication shows 5 different level like 25%, 50%, 75%, 100% and HH(overflow) This depends upon where customer set water probe
• 5 bright LED indications for 5 levels. Red light indicate : 25% (Low level) & HH(overow)When ever level goes below 25% or above 100% means over ow, hooter start(audio visual alarm) to indicate empty or overow tank conditions.
• This error condition has be acknowledged by pressing silent button for 2 seconds to make the alarm off. Green light indicate : 50% , 75%, 100% level
• Optional: Modbus RTU communication is available for BMS connectivity*
• Product can be support all type of sensors as level probe, mini oat & oat

Power Supply

• Single Phase 230 V- AC 50Hz
• Power ON Red LED indication on front side
• Connection is as per the wiring chart.
• (Use 6 core 1.5 Sq. mm cable or 3 core 2 cable of competent brand for sensing levels)

Installation Guide

• For installation customer has to open the box from front side and can mount on the desire place on wall with mounting indication hole.
• After mounting on wall connect cables and wiring as per wiring instruction
• As all the connection done check for correct positioning Red light will indicate 25% (Low level) & HH(overow) and Green light indicate 50% , 75%, 100% level